Ergotron 200 Series Dual Monitor Arm

Ergotron 200 Series Dual Monitor Arm provides telescoping adjustment. Easily extend or retract your monitors through a 23″ range of motion.

• Position two LCDs at the point of need, then push them back out of the way when not in use
• Touch-screen stability
• Cable management system routes and conceals cables under the arm
• Accommodates various display sizes; slide screens into place to align edges
• Rugged steel construction
• Extends out 23″ (58 cm) or folds back to 5.7″ (14.5 cm) from wall in storage position
• Rotate screens to view in either landscape or portrait mode

200 Series Dual Monitor Arm Product Spec

• Part Number: 45-231-200
• Description: 200 Series Dual Monitor Wall Mount Arm (black)
• Includes wall mount bracket, 2 extensions, crossbar and 2 sliding LCD mounts, VESA mounting screws
• † Maximum outside width of display is 21.25″ (54 cm) when displays are 2″ (5 cm) thick. This is typically the horizontal dimension of a 22″-diagonal screen-size monitor. Actual allowable width of displays will vary slightly depending on display thickness
• * Weight Capacity: 13 lbs (5.9 kg) per mount, 26 lbs (11.8 kg) total. Note: Monitors must be equal in weight or ±1 pound (.45 kg)
• Monitor depth greater than 3″ (7.5 cm) may diminish capacity
• Install display mounts on the bow at +2.5° or -2.5° angle to optimize viewing conditions
• Monitors are installed with 8° inward off-set angle, creating a 16° viewing parabola for better sight lines
• Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
• Durable, easy-to-clean powder-coated painted steel exterior
• Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud
• Shipping Dimensions: 5.25″H x 13.75″W x 24.25″D (133 x 349 x 616 mm)
• Shipping Weight: 11.8 lbs (5.3 kg)
• Warranty: Five (5) years